Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Tufflor Rapid

Reprotec Tufflor Rapid

"for projects where time is critical"


Reprotec Tufflor Rapid is a two pack Epoxy coating which is designed for quick turnaround projects, where speed of installation is important, but performance and durability is still key.

The material is supplied as a two pack system, comprising pre-weighed amounts of BASE and CURING AGENT.  After mixing together, an easily applied chemical and abrasion resistant finish is produced.  

  Typical Uses

As a tough, waterproof  wear resistant floor coating in manufacturing  areas, Showrooms, Trafficked Warehouse areas, Food preparation areas, Factory floors, Breweries, Abattoirs, Garages - Industrial and Domestic, Bottling factories, Engineering workshop floors, Aircraft hangar etc.

Suitable for Interior or Exterior projects.


  • Solvent free, low odour
  • fast cure times - 

    Tack free time @ 20°C:  3 hours

    Hard dry time@ 20°C:  6 hours

  • Very good chemical resistance
  • Excellent adhesion to concrete
  • High build
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned

  Typical Properties

Pot life @ 20°C: 30 Minutes

             @ 10°C: 60 Minutes

Colours: Red Cherry 04D45Blue Sky RAL 5015Auto Blue 20E51, Silver Grey RAL 7001Iron Grey RAL 7011, Auto Grey 10A07Leaf Green RAL 6002Oxide Red RAL 3009Safety YellowBlack, White

Click to download a colour chart



Coverage:  0.25-0.30kg/m²/coat

Tack free time @ 20°C:  3 hours

Hard dry time@ 20°C:  6 hours

Full chemical resistance @ 20°C:  5 days

Adhesion strength to concrete:  4.4 MPa (concrete failure)

Adhesion strength to mild steel:  >14 MPa

Chemical resistance:  excellent resistance to dilute acids, dilute alkalis, oil, petrol, diesel, vegetable oils, raw sewage etc



 Reprotec Tufflor Rapid is supplied in 5kg  packs


 A 5kg pack is sufficient to treat 16/18 m2 of surface area per coat we recommend a two coat treatment two coats of Reprotec Tufflor Rapid, providing an overall d.f.t. of 400-500 microns. (0.4 -0.5 mm.). It is possible on a good floor that one coat of Reprotec Tufflor Rapid will give you the desired finish. Use Reprotec Florprime Rapid on bare concrete as a primer.


one coat may be sufficient on a decent floor - two coats  will always look better.


Reprotec Tufflor Rapid should be applied strictly in accordance with the manufacturer’s instructions.


Please print off and refer to the mixing and application sheet below

 Technical Data Sheet

Please refer to Material Safety Data Sheet below for additional information

 MSDS Data Sheet


Clean Tools with Reprotec Toolclean

Back to the homepage of :-






.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any us at....

Latest Tweets