Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Tufflor Cold Cure

Reprotec Tufflor Cold Cure

"As tough as our normal Tufflor, with a lower temperature cure"


Reprotec Tufflor Cold Cure is a two pack Solvent Free Epoxy coating which will cure in colder environments

The material is supplied as a two pack system, comprising pre-weighed amounts of BASE and CURING AGENT.  After mixing together, an easily applied chemical and abrasion resistant finish is produced.  

Typical Uses

As a tough, waterproof  wear resistant floor coating for manufacturing  areas, Showroom, Trafficked Warehouse areas, Food preparation areas, Factory floors, Brewery Floors, Abattoir, Garage - Industrial and Domestic, Bottling factories, Engineering workshop floors, Aircraft hangar etc.

Suitable for Interior or Exterior projects.


  • Solvent free, low odour
  • Cures down to 0 degrees C.
  • Very good chemical resistance
  • Excellent adhesion to concrete
  • High build
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned

  Typical Properties

Pot life @ 20°C: 25 Minutes

             @ 10°C: 45 Minutes

Colours: Red Cherry 04D45Blue Sky RAL 5015Auto Blue 20E51, Silver Grey RAL 7001Iron Grey RAL 7011, Auto Grey 10A07Leaf Green RAL 6002Oxide Red RAL 3009Safety YellowBlack, White

Click to download a colour chart



Coverage:  0.25-0.30kg/m²/coat

Tack free time @ 20°C:  4 hours

Hard dry time@ 20°C:  8 hours

Full chemical resistance @ 20°C:  7 days

Adhesion strength to concrete:  3.9 MPa (concrete failure)

Adhesion strength to mild steel:  >12 MPa

Chemical resistance:  excellent resistance to dilute acids, dilute alkalis, oil, petrol, diesel, vegetable oils, raw sewage etc



 Reprotec Tufflor Cold Cure is supplied in 5kg  packs

Reprotec Tufflor Cold Cure is also supplied in 15kg  packs in three colours only:-

Auto Blue 20E51,   Auto Grey 10A07 and Silver Grey RAL7001


 A 5kg pack is sufficient to treat 16/20 m2 of surface area per coat we recommend a two coat treatment using two coats of Reprotec Tufflor Cold Cure, providing an overall d.f.t. of 400-500 microns. (0.4 -0.5 mm.). It is possible on a good floor that one coat of Reprotec Tufflor Cold Cure will give you the desired finish.

This is around £5 per square metre on a reasonable floor per coat.

one coat may be sufficient on a decent floor - two coats will always look better.


Reprotec Tufflor Cold Cure should be applied strictly in accordance with the manufacturer’s instructions.

Watch a video of Reprotec Griplite being applied as an anti slip finish over Reprotec Tufflor. The mixing and rolling techniques are the same for Tufflor Cold Cure, the difference being the anti slip finish.

Please print off and refer to the mixing and application sheet below

 Technical Data Sheet

Please refer to Material Safety Data Sheet below for additional information

 MSDS Data Sheet


Clean Tools with Reprotec Toolclean

Back to the homepage of :-






.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any us at....

Latest Tweets