Reprotec Steelcoat Primer is a two pack, water-based, Epoxy, anti-corrosive primer designed for the protection of steelwork.
Whilst optimum performance will only be achieved by applying to well-prepared substrates, Reprotec Steelcoat Primer will adhere well to minimally prepared surfaces.
Reprotec Steelcoat Primer has been formulated to provide fast touch dry times and rapid hardness development.
As an anti-corrosion primer for steel work.
As a holding primer for grit blasted steel surfaces.
Colours: Light grey, red
Volume solids: 60%
Specific Gravity: 1.46
Pot Life: 2 hours @ 20ºC
Touch Dry: 1-2 hours @ 20ºC
Hard Dry: 4 hours @ 20ºC
Full Cure: 7 days @ 20ºC
Overcoating at 20ºC: minimum 4 hours, maximum 2 months.
Coverage approx 6 m2 per litre per coat (one coat is usually sufficient)
Reprotec Steelcoat Primer is supplied in 1L, and 5L packs
Reprotec Steelcoat Primer shall be applied strictly in accordance with the manufacturer’s instructions.
Please print off and refer to mixing and application sheet below.
Please refer to Material Safety Data Sheet below for additional information