Reprotec Mattop is a single pack, CLEAR water based, matt sealer specifically developed for overcoating resin floor coatings and screeds to up-grade chemical and abrasion resistance, as well as to enhance the aesthetic appearance.
Can be used inside and outside ideal for a tough clear matt seal on concrete, tile or wood.
The material is easy to apply, and is fast drying to allow rapid access.
As a chemical and abrasion resistant, matt sealer for Resin floors to give a matt finish over newly coated Reprotec systems or as a matt topcoat for existing coating systems.
The coating is light/uv stable and is ideal for areas that are affected by sunlight. Suitable for Interior or Exterior projects.
Film appearance: Clear Matt
Q-UV Weatherometer: >2000 hours (no yellowing defects)
Light foot traffic may be allowed after 12 hours drying @ 20°C and full trafficking after 24 hours @ 20°C.
Optimum chemical resistance will be achieved after 48 hours @ 20°C.
As a top sealer or final coat: 40/50 m2
As a coating: 35/45m² per coat (minimum of two coats required).
Reprotec Mattop is supplied in 5 litre packs
Reprotec Mattop shall be applied strictly in accordance with the manufacturer’s instructions
Please print off and refer to the Technical Data Sheet below
Please refer to Material Safety Data Sheet below for additional information